Category Archives: Uncategorized

Can you still drive a car with a blown head gasket?

head gasket engine

Can you have a blown head gasket with no symptoms?

It is common knowledge that car engines overheat in the summer, but what many people don’t realize, they overheat in the winter too. When a car overheats too much, it can destroy the head gasket, which allows water or coolant to leak into the oil. Then the oil for the engine is watered down and more severe problems develop. 

Before we start a question and answer series here, let’s review what a head gasket is first.  The head gasket is just that, a gasket that is placed between the cylinder head and the engine block. This component seals the internal combustion process to allow the coolant and oil to travel in their respective paths throughout the engine for cooling and lubricating. 

When a mechanic tells you that you have blown your head gasket, that means this gasket, sandwiched between the cylinder head and engine block is busted. Water is now leaking into the oil or head gaskets are leaking oil into the water unless it is caught right away. 

Not really, your call will exhibit symptoms, even if mild and unnoticeable, there will be symptoms that your car’s head gaskets are blown. Okay, so how can I tell if I have a blown head gasket? There are some care makes or models that have established a reputation for blowing head gaskets. Your car may be one of those, which doesn’t mean you have a junker car or you bought a lemon. You simply just need to make sure you have the fluids check on regular basis. 

So how can you tell if your car’s head gasket is blown? A few signs would be:   

  • External coolant leaking from under the exhaust manifold.
  • Exhaust pipe is emitting white smoke. 
  • Bubbles in the radiator or overflow.
  • Engine overheating.
  • Oil is milky white.
  • Spark plugs are fouled.
  • Cooling system has low integrity.

What are the first signs of a blown head gasket?

As we mentioned earlier, the signs can be subtle for a blown head gasket, so being aware of these eight situations are your warning to get your car to the mechanic ASAP: 

  1. An external coolant or oil around the cylinder head and engine block seam. 
  2. Car engine is misfiring, mechanic testing will determine if there is a leak down of the cylinder compression.  
  3. Car misfires when started followed by white puff from the exhaust.
  4. A less obvious sign of a blown head gasket is overheating. A bad blown head gasket, you’ll see bubbles in the overflow. 
  5. Blue exhaust smoke can indicate two things: blown head gasket or other internal parts are worn like the rings, PCV system, or valve stem seals.
  6. Discolored fluids like milky white oil or oily looking water.

What causes head gaskets to fail?

A seal is formed with the head gasket between the cylinder head and engine block, and it seals the two components together under  extreme high pressure, hot combustion gases. It also seals when the engine coolant has the engine at a cold ambient temperature. 

Because there is a wide range of temperatures for a fairy large surface area, the head gasket wears and leaks develop over time.  Once a head gasket is installed, you shouldn’t be able to see it, but if you can, it means it is slipping out of its sealed position because the engine has gotten too hot from not enough coolant in the radiator. 

How long do head gaskets last?

As we mentioned, some makes of cars and some models will have a reputation of blowing head gaskets.  These aren’t rare, but they aren’t an everyday issue either.  The design and engineering of car motors and the head gasket have the intention of lasting up to 200,000 miles, what should be the lifetime of any car. 

head gasket being removed from deconstructed engine

Can head gaskets be fixed?

Well, that depends, but many times a blown head gasket can be fixed by the car owner with some great products on the shelf at your local auto parts store. These products actually allow you to create a head gasket without gaskets by creating a seal between the cylinder head and engine block. 

However, if you can’t determine if there is a blown head gasket, you’ll need a mechanic to check it for you.  There are some DIY test things you can try first, but before you try to repair your own head gasket, having a professional mechanic confirm the problem is always recommended. They have the expertise, knowledge, and skills that can tell you what’s wrong and what needs to be done to repair the car. 

One thing for certain, if you so have a blown head gasket, you don’t want to drive it any more than you absolutely have to. Some cars have aluminum engine and if you drive the car with a blown head gasket, you risk the engine overheating and for an aluminum engine, that is usually death of the engine. Call __PHONE__ today for blown head gasket repair service in Marietta and Atlanta, GA.

Can you drive a car with a bad water pump?

engine block being serviced

So, just how long do water pumps last?

Cars run on fuel right, so how important can a car water pump be? Is the car water pump and timing belt both important to a car functioning? For a person that isn’t mechanically inclined or knowledgeable, these questions aren’t surprising. 

Until they have experienced their car water pump broken, they may never understand the importance of a car water pump, or how that the car water pump and ac work together to keep the interior cool. To that end, we have answers to a few question the unknowing person may ask: 

Original equipment car water pumps can last up to 100,000 miles, even longer. The factors that can affect this is how you drive, how much you drive, and if regular professional maintenance is performed on the car. 

When it comes to replacement car water pumps, those same factors can affect the lifespan, but the quality of the water pump will affect it as well. A cheap brand of car water pump replacement may only last up to 30,000 miles, or even less before the car water pump is leaking. 

Can a water pump go out without leaking?

Anything is possible, but car water pump will usually start leaking as it begins its descent to quitting.  The car water pump’s internal mechanical has a seal on the shaft near the cooling circuit. It protects the bearings by blocking coolant from getting to the bearing assembly. 

When a car water pump is new, it is normal for the weep hole to have some seepage, this typically doesn’t last more than ten minutes of the car motor running. However, a car water pump with definite seepage drips from the weep hole or a large coolant bleed indication around the weep hole is abnormal and needs the attention of a professional mechanic. 

How do you know if your water pump is going bad?

There are a few parts of a car that when they are failing, immediate repair or replacement isn’t necessary. A car water pump isn’t one of those parts. 

The car water pump has an important role in the operation of your engine. It is what sends water and coolant to and through the engine. When the car water pump stops functioning, the consequences come fast and furious, often a total engine failure. Replacing a car water pump takes a little time, but the cost is less than replacing the entire engine.  Here are the indications of your car water pump is beginning to fail: 

  • POOR CIRCULATION: A car water pump moves the coolant and water through the radiator then around the engine, dissipating heat buildup.  Because there are metal parts connected within a car engine that move rapidly, they generate a lot of heat. When there is too much heat, the engine parts may fuse together, melt, or become warped, in other words, they are structurally compromised. The drive belt pulls the car water pump which make an internal impeller work that keeps the coolant and water circulating.
  • LEAKING: As we mentioned above, a leaking car water pump is an indication that the water pump is about to or already is failing. 
  • ICK: Gunk will build up around a car water pump when it has been leaking slowly over time. When you notice trails of coolant coming from the car water pump, or a gelled-like substance of coolant or rust around the car water pump exterior, you need to have it checked by a mechanic. 
  • NOISEY: A whining noise when you accelerate that gets louder with the acceleration could be a loose belt. However, a grinding or growling sound at the engine front is usually a bad bearing. This bearing could be in the car water pump and you should have your mechanic inspect the sound and determine the problem. 
  • OVERHEATING: Once the car water pump has failed, the engine overheats. Your car is now to the point of getting towed to your mechanic. Stop driving it as soon as it overheads or a ‘low coolant’ light comes on. 
  • STEAMING: When smoke or steam comes from the car radiator or even from under the hood, is an indication the engine has overheated. It may have serious damage already, so pull over, call a tow truck.          
car water pump close up

What sound does a bad water pump make?

Any high-pitched sound, or an increasingly loud whining sound as you accelerate is usually coming from the car water pump. The same sound happens when a belt is loose, or the bearings are bad. No matter which of these it is, getting your car to the mechanic is a must. 

Okay, several important questions have been answered, except, how long can you drive a car without a water pump? The mechanic’s answer, don’t. However, you may be able to drive a week with a bad car water pump, or it may go out unexpectedly if you haven’t noticed any of the indications we’ve discussed in this article. Need water pump service for your car in Marietta and Atlanta, GA? Call __PHONE__ today.

What are the Symptoms of a Bad Timing Belt?

timing belt

What Does a Timing Belt Do?

Are you wondering what a timing belt does? If so, let’s review some basics. A timing belt, which is also known as a cambelt, helps your internal combustion engine function. The way a timing belt works is that it uses your camshaft and the crankshaft rotation to synchronize your valves and pistons. This helps your engine run smoothly and efficiently.

What Are the Symptoms of a Bad Timing Belt?

Are you wondering what the symptoms of a bad timing belt are? Do you need a timing belt replacement? In order to discover more, please review the following list.

  • If you hear a ticking noise coming from your engine, there may be a problem with your timing belt.
  • If your car’s engine won’t turn over, that is another possible sign of a bad timing belt.
  • Have you observed an oil leak near the motor? This is another significant problem.
  • If your vehicle is observing exhaust issues, this could be due to a failing timing belt.
  • Finally, if your revs are not synced, then this is another red flag to be aware of.

If you have observed one or more of these signs or symptoms, it is urgent for you to contact a reputable mechanic shop as soon as possible. Your vehicle could be experiencing serious issues and should be diagnosed immediately.

When Should a Timing Belt Be Changed?

Are you wondering when your timing belt should be replaced? The answer varies from car manufacturer to car manufacturer. However, generally speaking, the timing belt should be replaced once every sixty to one-hundred thousand miles. In order to receive a more specific answer, you should consult your car’s vehicle manual. Over time, your timing belt will eventually break. This is because it is made out of rubber and is not made to last forever.

Does Timing Belt Give Warning?

Due to the fact that your timing belt is made out of rubber, you may wonder whether or not your timing belt will give you any warning before it’s completely worn down. According to a leading mechanic website, there are a few warning signs that will assist when it comes to your timing belt replacement. For instance, if your engine won’t turn over, that’s a problem. Your timing belt will need to be in good condition in the first place for your car to be able to start. A key thing to be aware of is the fact that if your belt is damaged or deteriorated, you will hear the starter engine begin but the motor won’t start or ignite.

What Happens If Timing Belt Breaks While Driving?

Are you worried about if your timing belt breaks while you are driving? This is an important consideration to be aware of. If your timing belt were to break then your engine will no longer be functional. Furthermore, if the timing belt were to break while driving in an interference engine the camshaft would stop turning. This would leave the engine valve in an open position. As a matter of fact, the pistons will strike the valves that are left open.

Can Timing Belt Cause Misfire

Timing belts are critical for the function of your engine. If your timing belt fails or is worn out, it means that the cylinders in your car’s engine will open and close out of sync. This is understandably a bad thing, as it can cause your engine to misfire. Please be sure to replace your timing belt whenever it is worn out. Getting an engine check will enable your mechanic to help you make a rational and informed decision for your car’s health.

Why Timing Belt or Chain

A timing belt, also known as a timing chain or a cambelt, is an integral part of the internal combustion engine. It has the powerful role of synchronizing the rotation of the crankshaft and the camshaft. A timing chain is also known as a roller chain.

Where to Replace Timing Belt

If you are a certified mechanic, you likely already understand exactly where a timing belt is supposed to go. If you are not and are desirous of learning, it is important to understand your skill level and whether or not you want to embark on this project without a certified mechanic on hand.

timing belt and transmission

Timing Belt to Check

Your local, certified mechanic will have the best tools and expertise for checking your timing belt. He or she will be able to give you the benefit of their experience to help you make the right decision for your vehicle.

Our team at American Engine Installations would be happy to help you with your timing belt in Marietta and Atlanta, GA. You can always reach out to us at __PHONE__ today.

Is it worth buying a used engine?

engine needs work

Why would a car need a new engine?

For most people, used engine blocks aren’t even a remote thought in their minds, but for a mechanic, either professional or shade-tree-backyard mechanic, a used engine is a valuable resource. When working on an older car that needs a motor, often buying a used engine or rebuild engine is financially feasible versus buying a new motor, or crate engine industry lingo. 

Most car owners will never have to replace the engine in their car with a new engine, rebuilt engine, or a used engine, it isn’t something that the average person even considers. However, that doesn’t mean they never will, and here are three reason that could cause that to happen: 

  • A Cracked Block: When the block cracks, the engine done. What causes a block to crack? There are a few different reason, with the most common being the engine overheated. The engine block is made of metal and it can only sustain a certain level of heat. When it gets overheated and cracks, the engine loses power. In this case, there is no fixing the engine, your only option is to have a new or used engine installed. 
  • High Mileage or Wear and Tear: As the miles increase on an engine, it will begin to wear and tear and no amount of routine maintenance will keep the engine and heat from creating friction.  The cylinder rings wear down, oil starts leaking,  and the gaskets will blow. This does damage to an engine, all inevitable part of a car’s life. Once the engine has reached that point of damage, it is done and either having it rebuilt or getting a used engine installation are the only options. 
  • Collision: While the most common reason to have a used engine installed in a car, it isn’t out of the ordinary either. Collision such as a head-on wreck or where the front end of a car is damaged, such as hitting a tree, can cause the need to replace the current engine. This is typically done with a used engine, especially if the insurance is going to pay for the repair. 

Is it cheaper to rebuild or replace an engine?

An engine rebuild is more likely to save you money as opposed to an engine replacement, whether is a new engine or a used engine. However, the cost of parts and labor for both scenarios should be considered, and the advice of your mechanic will help make that decision. A used engine with a warranty is going to be just as good as new engine, although not for as long of a warranty due to it being a used engine. 

How long will a used engine last?

Today, the engine in new cars is expected to last 100,000 miles or more when proper maintenance is given as recommended by the manufacturer.  A used engine is different because it is used. How many miles are on the used engine will factor into the lifespan left, and how it is driven and maintained will determine the lifespan to.  You could get another 100 miles from a used engine, or you may get 100,000 miles. It all depends on the quality of the used engine, how it driven, and the maintenance upkeep. 

Does replacing an engine reset mileage?

In most cases, the odometer is not reset, in many states that is illegal. However,  the mileage should be noted, and a record kept so that you know exactly how many mile you’ve driven on a used engine. It is important to keep track of that mileage for maintenance purpose as well, like oil changes and tire rotations. 

engine replacement

Does replacing an engine devalue a car?

Replacing a damaged car engine will give the car an extension on life, but it is not going to decrease the value any more than it will increase the value.  The only time replacing an engine in a car is in the world of antiques, hot rod, racing, and show cars.  

Those are cars that will have a certain criteria to be met and sometimes, replacing the existing engine with a new or used engine is necessary. In those instances, it may decrease or increase the value, depending on the criteria being met. 

No matter if the car is your daily driver or you have a hobby car as those we mentioned when a replacement engine is needed, always have an experienced professional mechanic do the install. A new engine, rebuilt engine, or a used engine should have the attention to detail that only a trained mechanic can provide. Always get a warranty for the engine, even a used engine should have some type of warranty, even it is nothing more than “guaranteed to drive off the property” type of warranty. Get started on your engine replacement today when you call __PHONE__!

Can a cylinder head be repaired?

cylinder service

What happens if one cylinder goes bad?

What is the difference between engine vs cylinder? Well, there isn’t a difference really, because there is  engine cylinder in a car. Every vehicle has an engine, and the size of the engine is designated by how many cylinders are in the engine. For example, your car has a V6 engine means it has 6 cylinders. A V8 engine in your neighbor’s truck means it has eight cylinder engine. When a cylinder engine repair is needed, it is more money and more work to repair a 4 cylinder engine versus an 8 cylinder engine. 

If an engine cylinder broken, your vehicle won’t have as much power. As we mentioned above, the size of the engine is designated by the number of cylinders inside the engine. When a cylinder breaks, it is referred to a mis-fired cylinder, meaning the engine is firing any power from that one cylinder. So if you a 4 cylinder car and one cylinder breaks, you lose one-fourth of the power. Without having cylinder engine repair, you risk ruining the engine completely.

Can you drive with a dead cylinder?

With only one broken cylinder, yes you can, but it isn’t recommended. Driving with the engine having a misfired cylinder can be potentially dangerous. You’ll already be low of power with one cylinder if not firing and if you another cylinder goes out, then you lose more power. 

An example would be with a 4 cylinder car, one cylinder is taking half the power, then two  cylinders misfiring would be half the power. Chances are that a 4 cylinder car won’t go far for long on only two cylinders firing. Before it is drove very much more, you need to take it your mechanic for a cylinder engine repair. 

How do you diagnose a dead cylinder?

Here are some indications that your car needs a cylinder engine repair: 

  • A loss of power is the biggest indication that your vehicle needs cylinder engine repair, especially if there is also having odd vibrations. The cylinders are what powers the engine, as cylinders are going out, the fuel mileage begins to suffer because the other cylinders are working harder to power the engine. Additionally, as you sit at an idle, your vehicle will start shaking as the engine is mis-firing.  These are indications that you need to take your car to a professional for cylinder engine repair promptly before there is more damage.
  • A loss of spark is another symptom of a misfiring cylinder in an engine. This is usually when the coil voltage can’t hop over the gap on the spark plug end. Bad, damaged, or worn spark plugs will cause the ignition coil to weaken, resulting in a cylinder misfiring. 
  • A clogged fuel injector will keep gasoline from mixing a good balance with the air/fuel mixture, resulting in a cylinder misfiring in the engine. Having the fuel injector checked and replaced with each oil change can prevent this from happening. 
  • When an engine is cold, a cylinder will intermittently misfire. This should stop after the engine has warmed up. If your vehicle’s engine has random misfiring, this isn’t easy to be diagnosed, but you should have your mechanic check to see if your vehicle needs a cylinder engine repair. 
cylinder head gasket removal

What causes a dead cylinder?

A misfiring engine is a common problem but isn’t always an easy diagnosis because you have to determine the cause first. The smaller the engine, the misfiring cylinder is easier to notice because it is taking away one or more of the cylinders that power to the engine. 

With a misfiring cylinder, in addition to the engine shaking and vibrating the steering wheel and the entire car, it may be difficult to start. The engine may also stall while sitting at an idle and depending on what you have turned on in the car, air conditioning, radio, etc., makes it even harder to start. There is typically three things that cause a misfiring cylinder: 

  • The loss of spark – as we described earlier, a misfiring cylinder keeps the spark from hopping from the coil to the spark plug. A cylinder engine repair for this is typically replacing the spark plugs. This can also be caused by a crack in the distributor cap which will need to be replaced.
  • Air and fuel mixture is out of balance – the first thing a mechanic will try for this engine cylinder repair is replacing the fuel filter. 
  • Loss of compression – this is a more detail engine cylinder repair and could require the valves being replaced, reseated. An experienced mechanic will perform a compression test will determine if the oil is leaking around the rings or valve guides. Can low oil cause a misfire? Definitely! While an engine needs oil to function, too much oil in the wrong places, like outside the valve covers, will cause the vehicle to misfire. 

Engine Cylinder Repair

Your car is a valuable asset for you, and not an inexpensive one. It is important to keep maintenance up on the vehicle like oil changes, fluid levels checked, etc.  By having a relationship with a mechanic you trust, they will learn your car and will advise you when they notice something amiss with the engine. Call __PHONE__ today for your engine cylinder repair in Marietta and Atlanta, GA.

Engine Overhaul vs Engine Remanufacturing

engine in need of overhaul

What is an engine overhaul?

Cars are expensive and when you have engine trouble, repairs can be expensive. What above when the mechanic tells you that your car needs an engine overhaul? Well, let’s dive into that topic: 

Does smoke come billowing out of the tailpipe? Or is it constantly running hot? If your car has begun to sound ‘funny’ at an idle, when you accelerate, or when you turn the car off, it may need an engine overhaul.  

If a mechanic has suggested you need an engine overhaul without inspecting the engine and other major components, you should get a second opinion. No matter how experienced a mechanic claims to be, a reputable auto garage knows they need to look further before stating an engine overhaul is necessary. Or the mechanic may give you the option of having the engine remanufactured instead of an engine overhaul.

If you’re not a car person, you may be confused with some of the terminology, such as what is the difference between an engine overhaul vs engine remanufacturing? A remanufactured engine is using the blueprints and specifications from the manufacturer to remanufacture the engine back to its original condition when it came off the assembly line. It is the next closest thing of buying a crate engine from the factory. 

The process of an engine overhaul is when the mechanic takes care of any failure issues, like the smoke billowing from the tailpipe. Let’s talk a little bit more about the different levels of an engine overhaul: 

What does it mean to overhaul an engine?

An engine overhaul is when a mechanic takes the entire engine apart, cleans all the parts, replaces any damaged or worn parts, gaskets, or seals, and puts it all back together. This requires the engine be lifted out of the car so that every bolt, nut, and part is easily reached, and factory approved parts replace the existing parts. 

Some mechanics refer to an engine overhaul as “in-chassis’ rebuild. This is when they rebuild only the ‘top’ part of the engine, which doesn’t require pulling the engine out of the car. The replace components of the engine like the cylinder liners, pistons, and piston rings. 

The first engine overhaul we described is more extensive and is a major undertaking, and more expensive. Are there engine overhaul benefits? Definitely, take a look at three main benefits:  

  • Upgrades the Performance: The engine is restored to factory-like condition with any defects with the engine are fixed, damaged and worn parts are either repaired or replaced. This will give you better fuel efficiency and overall performance.
  • Extended the Lifespan: With an engine overhaul, your car has a renewed lifespan. 
  • Less Expensive Than New Engine: An engine overhaul is less expensive than buying a new engine, buy hundreds of dollars! 

As with all good things, there are some engine overhaul disadvantages too. Yes, the end result is effectively a new engine after all the new parts are installed, but possible issues: 

  • An engine overhaul can take a long time – it all depends on the availability of the parts. If they are available locally, the process will go faster. If the mechanic has to order them, it could add a week, maybe two, or longer. 
  • An engine overhaul can get expensive – again, depends on the availability of the parts and where the mechanic has to order the parts from. The bigger the engine, the more costly an engine overhaul can be. 

How do you know if you need an engine overhaul?

There are many conditions that could be telling you it is time to consider an engine overhaul. Here are the five main ones:

  • White smoke coming from the tail pipe: This is an indication that the engine is burning on the inside or burning oil as old timers would call it. This is wearing out the pistons and rings, affecting the engine’s overall performance. 
  • Excessive fuel usage: When the start plugs are worn out, they aren’t working adequately and that affects the fuel usage of your car. 
  • Power reduced: When a car recognizes particular electronic issues, the motor control module begins to constrain the gear range, motor power, and speed. Several things can cause this from a bad battery to an actuator or sensor being out of order. When this happens, the transmission, the voltage, and everything that runs the car isn’t getting clear communication to power the car. 
  • A knocking noise as accelerating: When you accelerate, an unusual knocking noise could be the air and fuel mixture is wrong because of a clogged filter or fuel screen.
  • Damaged valves: When a valve fails to close adequately, the combustion fuels past the valve seat and the valve head overheats. 

Is it cheaper to rebuild or replace an engine?

Well, it is most of the time. As we mentioned above, it can get expensive buying parts for an engine overhaul. It depends on what size and type of engine and where the mechanic has to get the parts.  

You can purchase an engine that has been rebuilt already versus buying a new engine, and have it swapped with your car’s existing engine. Or you can have your mechanic purchase a crate engine direct from the manufacturer. Those are more expensive options than the typical engine overhaul. 

Then, there is the option of buying a new car if the engine in your current car quits. With that scenario, consider the car payment and car insurance, then an engine overhaul would be the cheaper option.   

Engine with new air flow

How long does an engine overhaul take?

This can depend on who is doing the engine overhaul and how detailed the job will be. A brief idea of the time it takes for a complete overhaul, which includes new bearings, rings, sleeves, valves, sleeves, and having the heads milled: 

  • The average garage shop:  4 days if they have all the parts easily accessible to 2 months if they need to order parts.  
  • A dedicated garage shop:  3 days if all the parts are available up to 1 month if they have to order any parts. 
  • A shade tree mechanic: Anywhere between three weeks to three years, depending on parts accessible and the time they have to work on the engine overhaul (if they have a full-time job and family activities. 

Is overhauling an engine good? If done properly and all damaged and worn parts are replaced, then yes, an engine overhaul is a good thing. It gets your car an extension on its lifespan, it keeps another ‘clunker’ out of the wrecking yard which helps the carbon footprint, and you’ll have an almost new-like car under the hood. Call __PHONE__ today for engine service.

Is a Rebuilt Engine as Good as New?

engine rebuild

Is a Rebuilt Engine as Good as New?

If you are looking to restore your vehicle, engine rebuilding is certainly an important consideration. Yet the question remains: is a rebuilt engine as good as new? The answer may surprise you. In frequent circumstances, rebuilt engines can be superior to new car engines. This is because better parts can be utilized for the engine rebuild. Design changes in parts can even correct problems that existed with the original engine. As technology advances, parts are created and manufactured better than before. Rebuilt engines are dependable and are backed by the engine manufacturer’s warranty program.

Can I Rebuild an Engine Myself?

If you are mechanically inclined, methodical, and do plenty of research beforehand, car enthusiasts generally agree that it is possible to rebuild an engine on your own. Internal combustion engines are fairly straightforward. However, and this is a big deal, rebuilding an engine on your own is a vast undertaking and is not for the faint of heart. You will need all of the necessary recommended tools as well as a large chunk of time dedicated to rebuilding an engine correctly. It is highly advisable that car-owners use an experienced and insured auto shop for the vast undertaking of a rebuilt engine.

What Does it Mean to Rebuild an Engine?

Definitions are important and help people understand what they are getting into. An engine rebuild is known as a process where the finished product is considered brand new from the inside out. All the parts of the engine that display signs of wear are replaced with brand new replacements. The parts that could be replaced include the valves, pistons, bearings, and seals. Other parts that could be replaced include O-rings, rubber or plastic parts, and gaskets.

Do Rebuilt Engines Last Long?

If an engine is optimally rebuilt, the engine can ostensibly last many tens of thousands of miles. According to leading car experts, if you truly plan on keeping a car for seventy to one-hundred thousand miles, it’s important to start off with a great premise. Find a great car that you like from the outset, and then start the process of getting the engine rebuilt from that point.

Does an Engine Rebuild Reset Mileage?

In truth, the only way to formally reset your engine miles is to install a new engine. The chassis will still have the same number of miles regardless. If you are truly looking to totally revamp your vehicle, it is important for you to be familiar with the limitations of an engine rebuild. A professional consultation with your local established mechanic will yield further insights that will help you on your journey.

How Rebuild Engine

Are you wondering how engines are rebuilt? To begin with, the space, time, and materials for the process will need to be allocated ahead of time. That’s why an auto mechanic shop is a perfect place for an engine rebuild process. With skilled mechanics, a sense of purpose, and a drive to achieve, many engines can be rebuilt in an auto mechanic shop. To find out the capacities of your local mechanic, please be sure to give yours a call today.

How to Rebuild Engine Step by Step

Would you like to boil down the process of an engine rebuild? If so, you’ve come to the right place. The first step is to remove and inspect the engine and engine parts. Each one of these parts must be disassembled and cleaned. The second step will be the machining process. Through machining, all the parts will be smoothened, which makes sure that all the parts will work together perfectly. The third step is to reassemble the engine. The fourth step will be testing the engine, and the fifth step is reinstallation.

Why Engine Rebuild

The benefits of a rebuilt engine can be very far-reaching for car owners. Please review the following advantages of an engine rebuild to discover more.

  • Rebuilding a damaged engine can be a more cost-effective option depending on the vehicle.
  • All the bearings, gaskets, and seals will be replaced, ensuring a smooth engine performance.
  • Upgrading the components of the engine will mean that you have improved gas mileage and fewer emissions.
engine rebuild

Is Engine Rebuild Worth It

It is always important to approach a catastrophic engine failure with an objective view of the cost-benefit analysis. For instance, if the crankshaft is cored, the cylinder head can’t be rebuilt. Furthermore, if the pistons need to be replaced and the engine block is very badly deteriorated, then an engine rebuild cost will correspondingly be much higher. In such cases, it is always best to consult with a trusted and respectable mechanic. He or she will be able to give you an appropriate and logical consultation with regard to you engine needs.

If you would like to discuss your engine rebuild in Marietta and Atlanta, GA, we are available now. Please reach out to us at __PHONE__ to discuss your engine today.

How Does an Engine Start?

Engine Parts.

How does an engine start?

Most of us take it for granted that when we turn the key in the ignition, the engine will purr to life. What many don’t know are the hows and whys that the engine starts in the first place. Knowing how your engine works and what the engine parts are doing can be vital to keeping your car well maintained. So, just what is happening when you turn the key?

When you turn the key, a whole lot happens under the hood. Once the key is turned a spark is generated igniting cylinder combustion. The combustion gets the engine started. But there is a lot more happening than that. The key is turned and it switches on the starter motor, turning the crankshaft, and the crankshaft starts the pistons going in the cylinders. All of this sends the engine cycle in motion, as fuel and air are pulled into the cylinders and compressed. This makes the spark plugs fire. 

As long as this cycle continues without interruption, your engine keeps running. Anytime something breaks down in this process, your car is going to stop running and you need to get repairs. If you are planning to make the repairs yourself and you need an engine parts supplier in Marietta and Atlanta, GA, you need to look no further than American Engine Installations. We can also help you with engine repair. Find out what parts we can supply you with by calling __PHONE__.

What are the most important parts in a car?

Your car has tons of parts, most of which operate together to keep the car running. There are some, however, that are essential, and without them your car is just going to sit in the garage looking nice. One of the most important parts your car needs is the battery. Your car isn’t going anywhere without a functioning battery and your lights and electrical system aren’t going to work either. Other essential parts include the axles, the transmission, engine parts like pistons, the brakes, as well as the radiator and the clutch. Almost any part under the hood is essential to the car functioning correctly.

How do I identify engine parts?

There are more parts under the hood than just the engine. If you take your car in for repairs could you differentiate between engine parts and other parts? How many parts are in a engine? and What are the parts of a car engine? While engines will vary depending on the size, most combustion engines are composed of these parts:

  • Cylinders: This is the core of the engine where the pistons are located. There are either four, eight, or six cylinders arranged either inline, flat, or in a V.
  • Pistons: These cylindrical pieces of metal move in and out of the cylinders to transfer expanding gas.
  • Piston Rings: Create a sliding seal between the piston’s outer edge and cylinder’s inner edge. They prevent the fuel/air mixture as well as exhaust from leaking into the sump and keep oil from the sump from leaking into the combustion space. 
  • Spark Plug: This part sends out the spark to ignite the fuel/air mixture for combustion to happen
  • Valves: Both intake and exhaust valves have to open properly at the right time so air and fuel get in and exhaust is let out.
  • Connecting Rod: The part that connects the piston to the crankshaft. It rotates at both ends to follow the movements of the piston and crankshaft.
  • Crankshaft: This part is what makes the pistons go in a circular motion instead of up and down.
  • Sump: Surrounds the crankshaft and contains some oil. The bottom of the sump is the oil pan.

What to clean engine parts with

A clean engine is a smooth-running engine. When you are rebuilding an engine, the engine parts have to be cleaned. Several methods and cleaners can be used. One popular, non-toxic and environmentally friendly method is soda blasting. With this method, you use ordinary baking soda and blasting the surface of the parts with it using either a dry blast cabinet or a vapor blast cabinet. Baking soda is a good medium to use to clean parts because it is water-soluble and you can put in additives to keep it from clumping. Add aluminum oxide to it when more aggressive cleaning is required. Baking soda alone rinses off with just water. 

What engine parts can be powder coated

Powder coating parts can help vehicles endure abuses on the road. Any part that can manage an electrostatic charge can handle powder coating. In the engine, the oil pan can be powder coated. 

What engine parts can be painted

When restoring an engine, you may want to paint some of the engine parts for aesthetic reasons. The main part of the engine you can paint is the engine block. You’ll want to use paint that will hold up to extremely high temperatures. 

A Car Engine.

Engine parts near me

If you are restoring or repairing an engine and need engine parts in Marietta and Atlanta, GA, American Engine Installations offers a full range of parts for sale for just about every type of engine. We are your connection for parts, repairs, and replacements. Find out all that we can do for you by calling __PHONE__.

What Is Motor Overhaul?

car parts and motors

Renewing your Car’s Motor

What is the purpose of engine overhauling? Every year, thousands of Americans hire mechanics to do overhaul motor work on cars, boats, trucks, and other vehicles. Their goal is to get more years out of the motor and avoid having to pay for a replacement. Is this always a good option though? Well, that depends on what condition your engine is in and what you need it for. Under the best circumstances, a motor overhaul will add more years to an old engine and improve performance. That requires a professional mechanic who is familiar with the type of engine and can do it at a price that makes sense. Let’s explore overhaul motor work and try to briefly explain what motor overhaul involves.

What Is the Purpose of Engine Overhauling?

Anything mechanical in nature has an approximate shelf-life. Depending on how much wear and tear it goes through, an engine can last for years to decades. Eventually, though, parts break down and you’ll start running into problems. For most car owners, you’ve likely experienced some form of engine breakdown. Whether it’s getting stranded on the side of the road or not being able to get to work, an engine failure can be a huge frustration.
Motor repair overhaul involves taking apart your engine and replacing any faulty or old components. While it’s not the same as getting a new engine, overhaul motor work can extend the lifespan of your engine and save you money.

How Do You Know If You Need an Engine Overhaul?

What are the signs of a bad engine? There are things you can look for before a total engine failure that can let you know you should overhaul your motor. Here are some signs to look for:

  • • Knocking sounds – if your engine is making knocking sounds while it’s running, it’s a sign that combustion timing is off.
  • • Black or Blue Exhaust – Look at the color of the exhaust your motor generates. If it’s a deep, dark, color then it’s a sign it’s in trouble.
  • • Lower Fuel Economy – If your engine is giving you fewer miles per gallon, then it’s time for an overhaul.
  • • Poor Oil Pressure – Failing engines can’t disperse oil as well, so you may see indications of poor oil pressure.
  • • White Exhaust – If your exhaust is coming out white, it means that your coolant is burning in your engine cylinders and needs a look.

This is not an exhaustive list. In reality, any time you notice something unusual with your vehicle, take it to a mechanic for a look. The earlier you act, the better your chances are that overhaul motor work can save your engine.

technician working on an engine block

How to Overhaul Motor

When you’re seeing the signs that your engine is in trouble, here’s how a professional engine repair service will overhaul the motor. Motor overhauling can be complex and take time depending on the engine type, so make sure you find a reputable company that will deliver the results you need.

The first step in the overhaul motor process is to disassemble the motor. A mechanic will separate the motor from the connected pumps and compressors so they can take a look. Once removed, they’ll likely use a chain block to lift it from the vehicle and place it in an open space where they can work. Then, they’ll take off any nuts, bolts, shims, and any other removable hardware. Finally, rotors will be taken out and then the engine is ready for inspection.

Experienced mechanics can perform a visual inspection on the engine. Motor repair overhaul experience is a huge plus, and a trained eye makes work more thorough and efficient. Mostly, they’ll be looking for things like moisture and dust that may be causing engine damage. A burning smell as the engine is taken apart often indicates damage as well. The shafts will be rotated to check whether the bearings are working as intended, and the ports will be checked to make sure the cooling is ok.

After the inspection, your motor will be cleaned, and any faulty components will be replaced or repaired. A heat lamp can be used to dry the inside of the motor to remove any moisture. During assembly, mechanics will use motor overhaul oil or some other lubricant to improve motor performance. When the motor is completely rebuilt, it will be run through a series of tests to ensure it’s ready to go.

Is Overhauling an Engine Good?

Overhaul motor work is a great option for trucks, cars, and other vehicles when owners want to extend the lifespan of their engines. It’s more affordable than replacing an engine, and sometimes all your motor needs are one or two new parts to work for years and years. On the other hand, if your engine is very old and constantly breaking down, a motor overhaul may not offer the best return on your money. If you’re running into recurring engine problems in your vehicle, ask a mechanic about whether an overhaul is a good idea. You may save a lot of money by fixing your current engine instead of buying a new one.

Considering a motor overhaul for your vehicle in Marietta and Atlanta, GA? Reach out to the professionals at American Engine Installations when you dial (404) 289-9997.

Is Replacing an Engine Worth It?

A Car Engine

Is replacing an engine worth it?

When your car needs repairs, one of the last things you want to hear is that your engine needs to be replaced. Depending on how old your vehicle is, engine replacement may not be worth the cost. On average, a new 4 cylinder engine will cost about $4,000 to $5,000 to replace. This cost could go up considerably for a V6 or V8 engine. While expensive, the replacement may be necessary, but there are cheaper options, one of which is low mileage used engines. 

You may ask, “How much does it cost to put in a used engine?” A used engine is considerably lower than a new one. On average, you can get a used engine for $400 to $700. If you need to replace your engine, you can find used engines in Marietta and Atlanta, GA at the engine specialists at American Engine Installations. We sell and install low mileage used engines, and provide a full range of engine services. Find out how we can help by calling __PHONE__

Is it cheaper to rebuild or replace an engine?

Engine replacement is expensive, and often people look for less expensive options. One option is a rebuilt engine. This means the current engine is disassembled, and parts like O rings or timing belts are repaired or replaced. The engine is reassembled, cleaned, and inspected. This is a cheaper option than replacing the engine. Plus it will be compatible with the vehicle’s computer system without needing adjustments to the computer. While a rebuilt engine is always a good option, you might also consider used engines. As mentioned, a used engine will cost anywhere between $400 to $700. 

Used engine vs rebuilt

When choosing between used engines and rebuilt engines, cost tends to be a major deciding factor between the two. Here is a breakdown of benefits of both types of engines.

Rebuilt benefits

  • Tend to be better for long-term reliability, and better warranties.
  • Compatible with the computer system.
  • Performance may be better because of new parts installed on it.

Used benefits

  • Although sometimes a short-term solution, costs are comparably lower.
  • If bought from a reputable dealer, these engines will be reliable. They have passed tests and have been tested in real driving situations.
  • Environmentally beneficial. Fewer older engines are thrown away.

Should you buy a used engine?

While used engines are a much cheaper option for replacement, you’ll have to consider several aspects including compatibility. You’ll want to make sure the used engine will fit with your vehicle and its computer system. Of course, this is a consideration you must make with a new engine. You’ll also want to factor in labor costs if you aren’t replacing the engine yourself. Even with labor charges, the used engine is still the cheaper option. You’ll find it’s a great option if you choose a low mileage used engine from American Engine Installations. We make sure our engines are of the highest quality, and we will install it for you.

Can I find a used engine

If you need an engine, a cheaper option than a new engine is a used engine. You can find used engines at various dealers like American Engine Installations. If you are asking, “How do I find a used engine?” you want to spend some time making a search that will land you the best, most reliable engine available.

How to buy used engine: To ensure you get the best deal you need to:

  • Make sure you need a new engine. Signs you need a new engine include it not starting in cold weather, excessive oil use, and oil pooling under the vehicle.
  • Get a reliable mechanic to inspect your current for any problems. The mechanic can let you know if the engine needs to be replaced or not.
  • Get all the information you can about your car including the VIN, its engine code, and production date.
  • Search for used and rebuilt auto parts dealers, and call around to several to see if they have engines available and what their prices are.
  • Find out what the engine’s mileage is. An engine with less than 75,000 miles is the best bet. The lower the mileage, the less wear and tear on components.
  • Make sure the dealer can verify the mileage with sources like Carfax. These sources will also determine if the engine was in an accident in the original vehicle, as well as other information.
  • Get a description of the engine and make sure all its parts are intact.
  • Ask about available warranties.
  • Have a professional install the engine.
  • Call __PHONE__ and get in touch with American Engine Installations for the most reliable used engines available.

Used engine for sale near me

When your engine is ready to be replaced, you may want to consider a used engine. American Engine Installations offers a full range of engine services including selling and installing used engines in Marietta and Atlanta, GA. Find out how we can help or schedule a service appointment by calling __PHONE__.